Buy Gitzo GH2720QR Two Way Fluid HeadGitzo GH2720QR Two Way Fluid Head Product Description:
- Designed to be the perfect tool for bird watching
- Built in quick release
- One handle locks both pan and tilt movements
- Silky smooth fluid movement
Product Description
Bird watching makes completely different demands on equipment used for video or photo applications. Almost all birdwatchers currently use tripod heads specifically developed to support video or photo equipment, which means the heads tend to be larger, heavier and more complicated than is needed for bird watching. This Gitzo head has been developed with one aim in mind: to make them the first, the only, 100% bird watching heads. An unconventional technical approach was used in developing these heads to guarantee ultra stable, precise observation, thanks to three innovations and improvements: fluid cartridges designed specifically for bird watching, the Single Lock System and high-precision internal components and mechanisms. Fluid cartridges on pan and tilt axes give ultra smooth movements that adapt perfectly to speed – from delicately controlled at low speeds (the holy grail for birdwatchers, this makes distance spotting and tracking much easier), to almost completely friction-free at high speeds (useful when fast equipment repositioning is required). A single lock is the other specific innovation for bird watching. Pan and Tilt movements are locked and frictioned in parallel by a single large control knob, making head adjustment simpler, faster and more effective than ever before. All internal mechanisms are tuned to give maximum control and to eliminate even the smallest give or play. The overall design has been optimized to produce a head which is extremely solid, yet lightweight and compact. Stability, precision and structural rigidity: these strengths perfectly match Gitzo carbon fiber tripods, especially the Leveling series, for additional speed and versatility. This combination gives birdwatchers extraordinary performance and portability. With this head, Gitzo continues its long history of inventing and creating products which are highly specialized and uniquely effective.
Customer Reviews
Most helpful customer reviews
5 of 5 people found the following review helpful.
Light, rigid, smooth, but quality issues and a couple of minor dislikes
By Peter Headland
Overall, this is an excellent head for spotting scopes. It is very rigid (does not flex or bounce), even when unlocked; I have mine on a hefty set of 3-series Gitzo legs and my scope hardly moves when the wind is howling - I can actually use 60x on a windy day.The friction/locking knob is large, easy to find, and goes from free to locked with a quick twist of the wrist. Most important, the locking knob does not move the scope at all: you can just center your subject up and lock it down. The pan and tilt are good - not as nice as a true fluid head, but plenty adequate for use with a spotting scope, even at high magnifications. There are no balance springs, but tightening the locking knob is rarely necessary unless the scope is at a really extreme angle - the mounting plate lets you get the scope balanced, and there seems to be just the right amount of "stiction" for most situations.Quality issues (minus 1/2 star):I bought a second one of these heads for my wife, and that jammed solid while I was setting it up. After some persuasion, I got it free again, but then the tilt movement was way too loose relative to the pan and could not be tightened fully. I also met a fellow birder using one of these heads and that had a slightly over-loose tilt. Since I purchased from Amazon, I got a replacement (which was perfect) within a couple of days, so no real harm done. Moral of the story - buy from Amazon, and return it if it doesn't feel right.Minor dislikes (minus 1/2 star):* The clamp for the pan handle is plastic, and needs to be tightened down hard to grip the handle. I am slightly concerned how it will stand up to knocks in the field long-term, but Gitzo's customer service is excellent, so I'm sure I will be able to get a replacement if it ever does fail.* The rubber on top of the mounting plate tends to peel up; I plan to put a piece of black tape around that. Interestingly, my wife's example doesn't seem to do this.* The locking knob "clonks" internally as the mechanism takes up slack when you go from locked to free and back again. This doesn't make any difference to the function of the head; it just feels slightly wrong. This is something most people would probably not even notice; I'm just obsessive.A few tips:* I am right-handed, but I switched the handle around to the left side. This means I can move the scope with my left hand and focus/zoom/work the locking knob with my right hand. Some folks simply do without the handle.* Paint a small mark on the locking knob, so you can see at a glance whether the head is locked.* Don't bother with the smaller version of this head - this one is plenty small and light enough.* Put the best carbon-fiber legs you can afford under this head - the latest Gitzo 3-series are great, the next size down Gitzos are adequate. Chinese knock-offs of the Gitzos I have seen were not as stiff/well damped as genuine Gitzo legs; YMMV. 3-section legs are stiffer than 4-section legs (and more convenient most of the time).
Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!
Could have gone smaller.....
