Buy Kraus C-GVR-210-RE-10ORB Golden Pearl Rectangular Glass Vessel Sink and Waterfall Faucet, Oil Rubbed BronzeKraus C-GVR-210-RE-10ORB Golden Pearl Rectangular Glass Vessel Sink and Waterfall Faucet, Oil Rubbed Bronze Product Description:
- Sink is made from tempered glass faucet is constructed from solid brass
- All mounting hardware and hot/cold waterlines are included
- Matching umbrella pop up drain and mounting ring are included
- Limited lifetime warranty
- Certified and listed by upc cupc csa iapmo ansi and scc
Product Description
Add a touch of elegance to your bathroom with a glass sink combo from Kraus. Stylish glass sink and matching waterfall faucet will complement any bathroom decor Installing Kraus combo is an ideal home improvement project. Glass sink is constructed from solid tempered glass. Sink features smooth interior with a vibrant color pattern. This contemporary rectangular vessel sink features a bright gold color and has a beautiful metallic luster which is accentuated when light shines on it. Designed for above counter installation with standard US plumbing connections. Solid brass umbrella pop-up drain is included in the same finish as the faucet. 21.875-Inch L x 13.875-Inch Weight: 4-Inch Glass thickness: 0.6-Inch (15 mm) 1.75-Inch standard drain opening Manufactured by Kraus. Limited Lifetime Warranty. Certified and Listed by UPC, cUPC, CSA, IAPMO, ANSI and SCC. The handcrafted nature of this product will produce minor differences in design and sizing. Subtle variations will occur from piece to piece, adding to its unique qualities. Measurements may vary slightly. Waterfall faucet is constructed from solid brass. Available in Chrome, Satin nickel, Antique brass; Oil rubbed bronze and Gold finishes. High-quality ceramic cartridge. Single-hole, top-mount installation. Single lever water and temperature control. Standard US plumbing connections. All mounting hardware and hot/cold waterlines are included. 7-Inch matching glass plate made of tempered glass. Faucet height (overall): 13-Inch Spout height: 8-Inch. Spout reach: 5.5-Inch. ADA compliant. Manufactured by Kraus. Limited Lifetime Warranty.
Customer Reviews
Most helpful customer reviews
3 of 3 people found the following review helpful.
Stunning. Take your time with installation.
By Steweygatz
Just a beautiful piece of artwork. Glass is painted on the underside and looks more like gold leaf strips. It seems very well made and with the faucet, it is really nice...and well seems to be well made. It has great instructions. I dont have it installed yet, but will let you know how that goes.INSTALLATION UPDATE:Faucet was fairly easy to install and it came with all the hardware including the braided hot/cold water flexible lines. If you have installed a faucet before, its fairly straight forward. Operation works as the book says and valves open/close without any leakage down the waterfall. The waterfall is very cool. One thing I am noticing is that with the lack of an water regulating aerator, there is a ALOT of water that comes out of the waterfall. So if you like to conserve water, this may not be for you.The sink presented an interesting challenge to keep it from wobbling. If you have seen the circular vessel sinks, you may notice that they are typically supported by some kind of a thick ring that fits over the drain hole. Since the circular vessels are uniform, my understanding is the ring allows the sink to rest nicely. The challenge with the rectangle is that the underside is not uniform and there is no "ring" support for the sink to sit on. And it is not flat, so it sits on a non-uniform footprint about the size of your palm.The instructions show the drain plug and the series of washers/gaskets and a tightening nut that holds the sink to the counter. There is a thin rubber washer that goes in the sink where the drain is inserted, while the thick rubber gasket and firm plastic washer and tightening nut go under the counter. When you install it this way (per the instructions) there is no real support of the sink and it wobbles and it also spins. Note that you cannot tighten the nut with tools, because it will shatter the sink. In this way, the glass sink is sitting directly on the counter,I called Kraus and talked with a guy who was semi helpful. I asked if I could use silicone under the sink to get a better grip on the counter and provide support. He said it was OK and it would not affect the painted bottom. But the more I thought about it, silicone is flexible and although the spinning may be fixed, it like would still wobble. I also didnt want to gunk up the counter top with silicone caulking, because I really didnt know how much to put on. And, the instructions dont even call for silicone.So I did a little searching on-line and found a solution that doesnt require silicone. Instead of putting the thick rubber gasket under the counter (Like the instructions tell you), I put it between the sink bottom and the counter. With this washer being thick and flexible/compressible, it essentially served in the same role as using silicone from a tube, without the wait for curing and the mess. Now the glass sits on the rubber gasket rather than the marble counter top. The firm washer and the tightening nut are still underneath. This solution may be Kraus intent anyway, and its just shown incorrectly (I believe) in the instructions (which are not very detailed by the way)Overall, the sink is fairly tight to the counter top. If you put pressure on it, you can wobble it, but it returns to a level position. If you really force it, you can spin it, but why would you?! At the end of the day, I like the fact that there is some give in the rubber gasket that I put under the sink, allowing the minimal movement.Frankly, Kraus should have a pre-molded gasket (something larger in my opinion) that gives the sink more support.
0 of 0 people found the following review helpful.
Looks beautiful, but beware ......
By Linda B. Santino
We bought two of these Krauss vessel sinks for our remodeled bathroom. The first thing that happened was that some of the goldleaf paint on the outside of the sink came off (don't tape anything to the outside of the sink), and although the inside still looks good the outside, which will be seen, obviously has flaws in it. Krauss would do nothing for us when we called them stating that they had no extra paint to send us and they don't warranty until after 30 days! My husband is going to clearcoat the outside of both sinks before they are installed to stop any further loss of paint. The bottom of the sinks are not completely flat and therefore are wobbly. Fortunately, we are recessing the sinks 2" below the vanity top so that will not be an issue for us, but if you are mounting them as Krauss wants you to: completely above the vanity top, they probably will need shimming in some way or other to keep them stable. Other than all that I do like the color and look of the sink, but a little better customer service from Krauss would have been appreciated.
0 of 0 people found the following review helpful.Beautiful and great quality
By Jewels
I was absolutely thrilled with this product. It's one of a kind, and it is excellent quality and color. The description and photos were very accurate and it was all that I wanted.
Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!
